The Informer aka The Rat
			Version 1.50 and 1.50B
				
		      (Demo & Registered Version)
			 README file (3/20/96)

System Requirements:
	386 CPU at 16 MHz or better.
	Sound Card (Optional) Program was tested using Sound Blaster 16.
	At least 1.5 Meg HD.
	CNIS or Standard Telephone Modem which features a Caller ID option.
	Windows 3.1, or Windows '95 (tested on both).

NEW TO VERSION 1.50 Registered and 1.50B Demo (March 3, 1996)

1. Renamed Software from PAD Caller ID & Database to The Informer aka The
   Rat.

2. Added Standard Telephone Modem support.  Modem MUST feature a Caller ID 
   option to work.  Check with the manual that came with your modem before
   using this software.  This Software will NOT WORK unless your modem 
   supports a Caller ID Option, or you have a CNIS Modem installed.

3. Added Sound and Voice.  24 User defined Voice Message.  These files are
   generated by using a sound card and software that can play 8 bit
   .WAV files, at a 22 KHz sampling rate.  Tested using Sound 
   Blaster 16.  Should work with many of the other brands of sound 
   cards that are compatible to the SB16.

4. Forwards incoming Telephone Numbers to your Beeper/Pager.  Forwards all
   incoming numbers to up to two defined Beeper/Pager Numbers.

5. Telephone Dialing feature, allows dialing of the currently displayed 
   Record's Telephone Number.  
-----------------------------------------------------------------------------   
WINDOW '95:
   TO INSTALL THIS PROGRAM WITHIN WINDOWS '95, YOU NEED TO DELETE ONE LINE 
   FROM THE FILE "SETUP.LST".  LOCATE THIS FILE ON DISK 1.
   REMOVE LINE CONTAINING --> VER.DL_
   DO THIS AFTER UNZIPPING CALLER1x.ZIP, AND BEFORE RUNNING THE SETUP FROM
   WINDOWS '95.
-----------------------------------------------------------------------------
Creating a Setup Disk on floppy:  
	CALLER15.ZIP - Demo Version
	CALLER16.ZIP - Registered Version
	Requires two blank 3.5", 1.44 Mbytes diskettes
	Create a subdirectory called C:\TEMP on your Hard Drive.
	UNZIP CALLER1x.ZIP to C;\TEMP.  This will unzip two files called 
	DSK1_V1x.ZIP and DSK2_V1x.ZIP.  DSK1_V1x.ZIP contains the SETUP 
	programs needed to install software to Windows.  
	
	Place a BLANK Formatted diskette in drive A: and UNZIP DSK1_V1x.ZIP 
	to it.  Once complete, UNZIP DSK2_V1x.ZIP to the second diskette.
 
Before Installing, have your Modem Manual on hand.  You will need to 
Setup the Modem Init String after program is started up.
	It requires 
		COMMAND ECHO  = DISABLED  AT Command E(n)
		RESULTS CODES = DISABLED  AT Command Q(n)
		CALL ID       = ENABLED and using unformatted HEX or ASCII
				Transfer. AT Command #CID=(n)

Also Back Up INFCALL.MDB, INFCALL.LDB and all INFORM[ 0 to 24 ].WAV if you 
are Re-Installing this Software.  During the Re-Install, these data files will be 
over written.

Running Setup:

1.      Insert Setup Disk 1 into A: or B: drive.
2.      From Windows 3.1 Program Manager click on  "File" from
	the Menu then select "RUN".
	From Window's 95 click START and select RUN from the Menu.
3.      Type A:SETUP or B:SETUP and Click "OK"
5.      When the Setup is completed, view the Help for all documents.

Start the program, and you'll be transfer directly to the Configuration 
Form.

6.      First time installation, Sound is Disabled, you'll have to Enable it,
	if you have a Sound Card running within Windows.
7.      You'll need to setup the AT Command String for the Standard 
	Telephone Modem.  A CNIS Modem don't require this set up.
8.      Once complete, make sure you SELECT FROM THE MENU BAR 'FINISHED' 
	and 'Save all Changes' before Exiting the Forms.  Both the LOGGING
	and AREACODE subdirectories need to be created before running the 
	software.
9.      If you set the program to use Sound and Voice, but you don't have
	a Sound Card Installed, the program will NOT function any longer.
	You'll need to edit the INFCALL.INI file and change the line just
	below the Label [SOUND_CARD_INSTALLED] to 'NO'.  A Re-Install will
	also correct this problem.

Advice:
Always backup INFCALL.MDB and INFCALL.LDB Database files to protect against
data loss.

Note:
Most Program Objects are HELP sensitive.  Select the Object with the Mouse
by clicking on it, then press F1, Help for that object will be displayed.

-----------------------------------------------------------------------------
THE INFORMER AKA 'THE RAT' DEMO VERSION 1.5B IS THE FULL WORKING PROGRAM.  
IT ONLY ALLOWS SIX (6) INCOMING CALLS TO BE PROCCESSED BEFORE TERMINATION.  
IF THIS SHOULD OCCUR, JUST RESTART THE DEMO TO EVALUATE FURTHER.

TO ORDER SEND $25.00 MONEY ORDER TO
	DAN MARCHESANI
	1455 - 64TH STREET
	NORTH BERGEN, NJ 07047
	(201) 861-1189

Email   102226.2000.compuserve.com
WWW     http://ourworld.compuserve.com/homepages/DMarchesani/
Phone   (201) 861-1189, call after 6 PM EST
-----------------------------------------------------------------------------